Mobility and Safety
|
Mobility Aids Leg Lifter - Bed and Relaxation Raise Or Lower Legs From A Bed Or Wheelchair With The Leg Lifter! Use this handy mobility aid to raise or lower your legs from the bed or wheelchair. This leg lifter is ideal for people who have had a total hip replacement or have limited use of their legs. The leg lifter allows a person to lift a leg without bending over. The foothold strap and the 26 long aluminum rod are covered with 1" webbing to provide comfort during use. Leg Lift Features: Made of nylon webbing with an aluminum center rod The unit now comes preformed with a wide non-slip foot stabilizer Foot stabilizer is rigid due to aluminum center and stays open to make it easy for your foot to slip in The flexible wrist strap allows you added leverage Leg Lift Specifications: Non-slip, foot stabilizer measures 29" Total length is 35" Foot Loop: 5.5" W x 3.75" H This is a hygiene item and is non-returnable .
|
|
Mobility Aids Universal Holder Hold and move a variety of everyday objects if grasping is a challenge. The universal holder is very helpful for people who have trouble grasping objects. Use the attached velcro strip to attach the holder to any object you need to hold,such as a telephone, receiver, walker, cup, bottle, brush, hairdryer or other device. This device compensates for a lack of grasping capability as well as simplyreducing hand fatigue. Universal Holder features: Can be installed on almost any surface or object Makes life much easier for those who have trouble grasping Very popular as a grasping aid for walkers Flexible plastic handle firmly grasps any size hand Universal Holder installation instructions: 1. Lock the two pieces of velcro together. 2. Peel of the paper backing from one of the strips and attach that strip to the universal holder 3. When you are ready to attach the Universal Holder to an object peel off the paper backing on the velcro strip and attach the universal holder to the object.
|
|
Medical Supplies Restores resident's dignity by concealing drainage bags from viewHangs under wheelchairs, geri-chairs and from bed railsBacteriostatic; cleans easily with soap and water
12.06
17.71
|
|
Medical Supplies Easily attaches to walkers with hook and loop closures. Carry all pouch comes with one large compartment. Made of navy denim fabric and completely washable.
12.12
17.62
|
|
Medical Supplies For use with all 1? folding walkers. Comes with plastic insert tray and cup holder (10200B-1), 1/ea
12.86
18.7
|
|
Medical Supplies Invacare canes offer a wide assortment of handgrip styles. In addition, you will also find a stylish and sophisticated line of canes.Features:Adjustable Canes- Limited lifetime warranty- Wrist strap (offset handle canes only) - Weight capacity 250 lbs.- Packaged six (6) canes per carton.
14.2
20.29
|
|
Independent Living Offset Door Hinges - Offset Hinges These attractive and durable offset door hinges allow you to open the door up completely flush with the wall, or allow you to open a door so it's completely flat and tucked away; up to a 180 degree swing. This helps remove that portion of the doorway that normally gets in the way of the passageway. The Expandable Offset Door Hinges add 2" to any doorway opening to allow barrier free access for most wheelchairs or walkers. They are ideal for most bathroom doors and can be easily installed as they use the same screws and holes as the existing hinge. The expandable offset door hinges are cost effective and can be retro-fitted to handle most residential doors. Ideal for households that use wheelchairs or walkers as well as for Assisted Living Facilities to comply with ADA regulations. Offset Door Hinges Features: 3 hole side measures 2" x 3 1/2" Decorative brass finish Packaged in a box of two Related Searches: Offset brass, door hinge, hinges, expandable brass door hinge Returns: All returns subject to ActiveForevers return policy and a 15% reprocessing fee. Please call Customer Service for a RMA (Return Merchandise Authorization) Number. Unauthorized returns will not be accepted.
|
|
Mobility Aids Universal Cup and Bottle Holder If you're looking for a way to keep your drink secure without spilling on your walker then look no further. The Universal Cup and Bottle Holder is a strong gripping drink holder that fits to most walkers, wheelchairs and more. We've researched and tested several cup holders and found the Universal Cup and Bottle Holder to be an outstanding mobility aids due to its strong grip, anti-spill features and price. The Universal Cup and Bottle Holder is a durable drink holder that is equipped with four internal grips to firmly grasp your drink to avoid spills. It holds a variety of drink sizes and easily attaches to most walkers and wheelchairs. The Universal Cup and Bottle Holder can also fit baby strollers. Universal Cup and Bottle Holder Features: Holds a variety of cup and bottle sizes Easily attaches to most walkers and wheelchairs Four internal grips firmly grasp your drink to avoid spills Attachment features 16 rotating grip positions Attachment rotates 360 degrees Can also fit baby strollers Universal Cup and Bottle Holder Specifications: Dimensions: 5.5" H x 4" W Unit weight: 0.5 lbs. Minimum cup/drink size: 1.75" diameter Maximum cup/drink size: 3.5" diameter Weight capacity: 2.2 lbs. Walker/wheelchair tube size requirements: 1" - 1.25" How to Install the Universal Cup and Bottle Holder: Undo the nut and remove the flexible mounting strap Wrap the mounting strap around the handle tube, plastic or foam as tight as possible Lock the raised sections of the strap into the grooves and lock the screw using the plastic nut and tighten until securely in place You can now adjust the angle of your bottle holder so that it sits as level as possible Discounts available for purchases of 10 units or more: 1 - 9 units: Everyday ActiveForever guaranteed low price 10 - 24 units: ( $13.95 each ) 25 - 49 units: ( $12.96 each ) 50 or more units: ( $11.95 each ) Returns: All Universal Cup and Bottle Holder returns are subject to Acti
|
|
Mobility Aids Walker Ski Glides These durable walker glides last up to 3 times longer than normal glides! Glide smoothly over any surface, such as grass and cement! Attach the Carex Walker Ski Glides to any walker to improve mobility. The Carex walker ski glides fit into the rear legs of a walker. Fits walker tubing from 1" - 1 1/8". This universal size should fit virtually all walkers. The ski glides install easily with a Phillips head screwdriver. The Carex walker ski glides are constructed of durable Dupont acetal resin and last up to 3 times longer than conventional glides. Walker Ski Glides Specifications: Fits 1 1/8" diameter tubing Assembly instructions included 2 ski glides included Installs easily with a Phillips head screwdriver Constructed of durable Dupont acetal resin and last up to 3 times longer than conventional glides Great replacement for your old, worn tennis ball glides! Color: White Returns: All Walker Ski Glides returns are subject to ActiveForever's return policy and a 15% reprocessing fee. Please call Customer Service for a RMA (Return Merchandise Authorization) Number. Unauthorized Returns will not be accepted. Related Searches: A809-00, Carex
|
|
Independent Living Car Caddie Door Frame Strap with Handle If you need a little extra assistance getting in an out of the car, then look no further than the Car Caddie Door Frame Strap with Handle. We've researched and tested several vehicle mobility aids and found the Car Caddie to be a great mobility aid in terms of durability, ease of use and price. The Car Caddie Door Frame Strap Hanger with Handle is recommended by doctors and therapists, and has even been mentioned in AARP Magazine's "Vroom for Improvement" article as a great product for elderly drivers. Get in and out of the car with ease. The Car Caddie Door Frame Strap with Handle attaches to the frame of most vehicle doors. It offers a balancing support for persons entering or leaving the car. The Car Caddie Door Frame Strap with Handle features an adjustable strap made of durable nylon for long-lasting use. The Car Caddie can be adjusted to accommodate varying window heights. Soft cushion grip fits comfortably in the hand. Ergonomically contoured buckle can be attached easily to most cars, vans or trucks. Car Caddie Door Frame Strap with Handle Features: Helps you get in and out of the car with ease Attaches to the frame of most vehicle doors Patent pending Durable, long lasting nylon Can be adjusted to accommodate varying window heights Extra balance or support in getting in or out of your vehicle Soft cushion grip fits comfortably in the hand Ergonomically contoured buckle Car Caddie Door Frame Strap with Handle Specifications: Strap length: 9.5" - 15" Handle grip width: 4.5" Weight limit: 250 lbs (also depends on your car door) Warranty: One-year manufacturer's warranty Returns: All returns subject to ActiveForevers return policy and a 15% reprocessing fee. Please call Customer Service for a RMA (Return Merchandise Authorization) Number. Unauthorized returns will not be accepted. Related Searches: strap hanger
|
