Electrotherapy
|
Electrotherapy Tyco Conductive 3 oz. TENS Unit Gel - Home Health Care The Tyco Conductive 3 oz. TENS Unit Gel is a non-irritating, non-adhesive Conductive Aloe Vera Gel used for a multi-purpose electromedical coupling gel for TENS, EMS, or ultrasound applications. Patients who experience irritation from conductive gels may find this formula with aloe vera to be soothing to the skin. Provides relief from all irritations; ideal for patients with sensitive skin. The Tyco Conductive 3 oz. TENS Unit Gel is water soluble and non-staining. For external use only. It is the product of choice for non-adhesive conductive rubber/carbon electrodes. Tyco Conductive 3 oz. TENS Unit Gel Features: Non-irritating, non-adhesive Conductive Aloe Vera Gel Designed to use with the LTU Laser Tens Unit and other TENS Unit, Electronic Muscle Stimulator and/or ultrasound applications Aloe vera soothes skin on contract, ideal for those with sensitive skin Tube contains 3 oz. Return policy: Due to hygiene purposes, this item is non-returnable. Please refer to ActiveForever's return policy for more detailed information.
|
|
Electrotherapy Self-Adhesive Pre-Gelled TENS Unit Electrodes The Self-Adhesive Pre-Gelled TENS Unit Electrodes are replacement electrode pads for use with most TENS Units and Electronic Muscle Stimulators. The Self-Adhesive Pre-Gelled TENS Unit Electrodes can be used approximately 3-5 times before they begin losing their adhesiveness. To provide better adhesive support we recommend our It Stays Roll-on Body Adhesive (a19050). TENS Unites are a set of electrodes which are placed on the skin on your back and it emits an electrical signal which stimulate your neurons through the skin. The sensation is more like the tingling and numbness of your jaw after dental work than like pain. Tens Unit Electrodes Directions for Use: Application: Clean skin thoroughly prior to each application of electrodes. Electrodes do not stick well if any lotion, oil, make-up, dirt, etc. is left on skin. Insert the pins of the lead wire from the device into the electrode wire connectors. Remove the electrodes from the protective liner and apply firmly to the skin. Adhesion improves when electrodes reach skin temperature. Helpful hint: Always moisten skin with a damp cloth with water prior to applying electrodes. This will improve the electrode adhesion and life. Removal: Lift at the edge of electrodes and peel. Do not pull on the lead wires when removing electrodes from the release liner or skin. You may damage the electrodes if you do so. Place the electrodes on the liner and remove the lead wire by twisting and pulling at the same time. Care and storage: Between uses, store the electreodes in the resealable bag in a cool, dry place. The life of the electroedes varies depending on skin condition, storage, amount of use, type of satimulation, and stimulation site. Electrode life may be extended by carefully following the application instruction above. Important: The electrodes are intended for single patient use only. Do not apply to broken skin. Should skin rash occur, discontinue use a
|
|
Electrotherapy Drive Replacement TENS Unit Lead Wires - Home Health Care The Drive Replacement TENS Unit Lead Wires are replacement lead wires for use with the following Drive TENS Units and Electronic Muscle Stimulators: Drive Deluxe Dual Channel TENS Unit (AGF-3X) - a12271 Drive Dual Channel TENS Unit with Timer (AGF-602) - a12277 Drive Economy Dual Channel TENS Unit (AGF-3E) - a12272 Drive Digital Dual Channel 5 mode TENS Unit (AGF-5x) - a12273 Drive Digital Electronic Muscle Stimulator with Timer (AGF-6x) - a12274 Drive Dual Channel TENS Unit (AGF-601) - a12276 The Drive Replacement TENS Unit Lead Wires Specifications: Wire length: 43" Contains two lead wires Fits Drive TENS units made after 2002 About TENS (Transcutaneous Electrical Nerve Stimulation) therapy: It is a set of electrodes which are placed on the skin on your back and it emits an electrical signal which stimulate your neurons through the skin. (Thus the name.) The sensation is more like the tingling and numbness of your jaw after dental work than like pain. Due to hygiene purposes, this item is non-returnable.
|
|
Electrotherapy Self-Adhesive Pre-Gelled TENS Unit Electrodes The Self-Adhesive Pre-Gelled TENS Unit Electrodes are replacement electrode pads for use with most TENS Units and Electronic Muscle Stimulators. The Self-Adhesive Pre-Gelled TENS Unit Electrodes can be used approximately 3-5 times before they begin losing their adhesiveness. To provide better adhesive support we recommend our It Stays Roll-on Body Adhesive (a19050). TENS Unites are a set of electrodes which are placed on the skin on your back and it emits an electrical signal which stimulate your neurons through the skin. The sensation is more like the tingling and numbness of your jaw after dental work than like pain. Tens Unit Electrodes Directions for Use: Application: Clean skin thoroughly prior to each application of electrodes. Electrodes do not stick well if any lotion, oil, make-up, dirt, etc. is left on skin. Insert the pins of the lead wire from the device into the electrode wire connectors. Remove the electrodes from the protective liner and apply firmly to the skin. Adhesion improves when electrodes reach skin temperature. Helpful hint: Always moisten skin with a damp cloth with water prior to applying electrodes. This will improve the electrode adhesion and life. Removal: Lift at the edge of electrodes and peel. Do not pull on the lead wires when removing electrodes from the release liner or skin. You may damage the electrodes if you do so. Place the electrodes on the liner and remove the lead wire by twisting and pulling at the same time. Care and storage: Between uses, store the electreodes in the resealable bag in a cool, dry place. The life of the electroedes varies depending on skin condition, storage, amount of use, type of satimulation, and stimulation site. Electrode life may be extended by carefully following the application instruction above. Important: The electrodes are intended for single patient use only. Do not apply to broken skin. Should skin rash occur, discontinue use a
|
|
Electrotherapy Self-Adhesive Pre-Gelled TENS Unit Electrodes The Self-Adhesive Pre-Gelled TENS Unit Electrodes are replacement electrode pads for use with most TENS Units and Electronic Muscle Stimulators. The Self-Adhesive Pre-Gelled TENS Unit Electrodes can be used approximately 3-5 times before they begin losing their adhesiveness. To provide better adhesive support we recommend our It Stays Roll-on Body Adhesive (a19050). TENS Unites are a set of electrodes which are placed on the skin on your back and it emits an electrical signal which stimulate your neurons through the skin. The sensation is more like the tingling and numbness of your jaw after dental work than like pain. Tens Unit Electrodes Directions for Use: Application: Clean skin thoroughly prior to each application of electrodes. Electrodes do not stick well if any lotion, oil, make-up, dirt, etc. is left on skin. Insert the pins of the lead wire from the device into the electrode wire connectors. Remove the electrodes from the protective liner and apply firmly to the skin. Adhesion improves when electrodes reach skin temperature. Helpful hint: Always moisten skin with a damp cloth with water prior to applying electrodes. This will improve the electrode adhesion and life. Removal: Lift at the edge of electrodes and peel. Do not pull on the lead wires when removing electrodes from the release liner or skin. You may damage the electrodes if you do so. Place the electrodes on the liner and remove the lead wire by twisting and pulling at the same time. Care and storage: Between uses, store the electreodes in the resealable bag in a cool, dry place. The life of the electroedes varies depending on skin condition, storage, amount of use, type of satimulation, and stimulation site. Electrode life may be extended by carefully following the application instruction above. Important: The electrodes are intended for single patient use only. Do not apply to broken skin. Should skin rash occur, discontinue use a
|
|
Electrotherapy Self-Adhesive Pre-Gelled TENS Unit Electrodes The Self-Adhesive Pre-Gelled TENS Unit Electrodes are replacement electrode pads for use with most TENS Units and Electronic Muscle Stimulators. The Self-Adhesive Pre-Gelled TENS Unit Electrodes can be used approximately 3-5 times before they begin losing their adhesiveness. To provide better adhesive support we recommend our It Stays Roll-on Body Adhesive (a19050). TENS Unites are a set of electrodes which are placed on the skin on your back and it emits an electrical signal which stimulate your neurons through the skin. The sensation is more like the tingling and numbness of your jaw after dental work than like pain. Tens Unit Electrodes Directions for Use: Application: Clean skin thoroughly prior to each application of electrodes. Electrodes do not stick well if any lotion, oil, make-up, dirt, etc. is left on skin. Insert the pins of the lead wire from the device into the electrode wire connectors. Remove the electrodes from the protective liner and apply firmly to the skin. Adhesion improves when electrodes reach skin temperature. Helpful hint: Always moisten skin with a damp cloth with water prior to applying electrodes. This will improve the electrode adhesion and life. Removal: Lift at the edge of electrodes and peel. Do not pull on the lead wires when removing electrodes from the release liner or skin. You may damage the electrodes if you do so. Place the electrodes on the liner and remove the lead wire by twisting and pulling at the same time. Care and storage: Between uses, store the electreodes in the resealable bag in a cool, dry place. The life of the electroedes varies depending on skin condition, storage, amount of use, type of satimulation, and stimulation site. Electrode life may be extended by carefully following the application instruction above. Important: The electrodes are intended for single patient use only. Do not apply to broken skin. Should skin rash occur, discontinue use a
|
|
Electrotherapy Self-Adhesive Pre-Gelled TENS Unit Electrodes The Self-Adhesive Pre-Gelled TENS Unit Electrodes are replacement electrode pads for use with most TENS Units and Electronic Muscle Stimulators. The Self-Adhesive Pre-Gelled TENS Unit Electrodes can be used approximately 3-5 times before they begin losing their adhesiveness. To provide better adhesive support we recommend our It Stays Roll-on Body Adhesive (a19050). TENS Unites are a set of electrodes which are placed on the skin on your back and it emits an electrical signal which stimulate your neurons through the skin. The sensation is more like the tingling and numbness of your jaw after dental work than like pain. Tens Unit Electrodes Directions for Use: Application: Clean skin thoroughly prior to each application of electrodes. Electrodes do not stick well if any lotion, oil, make-up, dirt, etc. is left on skin. Insert the pins of the lead wire from the device into the electrode wire connectors. Remove the electrodes from the protective liner and apply firmly to the skin. Adhesion improves when electrodes reach skin temperature. Helpful hint: Always moisten skin with a damp cloth with water prior to applying electrodes. This will improve the electrode adhesion and life. Removal: Lift at the edge of electrodes and peel. Do not pull on the lead wires when removing electrodes from the release liner or skin. You may damage the electrodes if you do so. Place the electrodes on the liner and remove the lead wire by twisting and pulling at the same time. Care and storage: Between uses, store the electreodes in the resealable bag in a cool, dry place. The life of the electroedes varies depending on skin condition, storage, amount of use, type of satimulation, and stimulation site. Electrode life may be extended by carefully following the application instruction above. Important: The electrodes are intended for single patient use only. Do not apply to broken skin. Should skin rash occur, discontinue use a
|
|
Electrotherapy Self-Adhesive Pre-Gelled TENS Unit Electrodes The Self-Adhesive Pre-Gelled TENS Unit Electrodes are replacement electrode pads for use with most TENS Units and Electronic Muscle Stimulators. The Self-Adhesive Pre-Gelled TENS Unit Electrodes can be used approximately 3-5 times before they begin losing their adhesiveness. To provide better adhesive support we recommend our It Stays Roll-on Body Adhesive (a19050). TENS Unites are a set of electrodes which are placed on the skin on your back and it emits an electrical signal which stimulate your neurons through the skin. The sensation is more like the tingling and numbness of your jaw after dental work than like pain. Tens Unit Electrodes Directions for Use: Application: Clean skin thoroughly prior to each application of electrodes. Electrodes do not stick well if any lotion, oil, make-up, dirt, etc. is left on skin. Insert the pins of the lead wire from the device into the electrode wire connectors. Remove the electrodes from the protective liner and apply firmly to the skin. Adhesion improves when electrodes reach skin temperature. Helpful hint: Always moisten skin with a damp cloth with water prior to applying electrodes. This will improve the electrode adhesion and life. Removal: Lift at the edge of electrodes and peel. Do not pull on the lead wires when removing electrodes from the release liner or skin. You may damage the electrodes if you do so. Place the electrodes on the liner and remove the lead wire by twisting and pulling at the same time. Care and storage: Between uses, store the electreodes in the resealable bag in a cool, dry place. The life of the electroedes varies depending on skin condition, storage, amount of use, type of satimulation, and stimulation site. Electrode life may be extended by carefully following the application instruction above. Important: The electrodes are intended for single patient use only. Do not apply to broken skin. Should skin rash occur, discontinue use a
|
|
Electrotherapy Self-Adhesive Pre-Gelled TENS Unit Electrodes The Self-Adhesive Pre-Gelled TENS Unit Electrodes are replacement electrode pads for use with most TENS Units and Electronic Muscle Stimulators. The Self-Adhesive Pre-Gelled TENS Unit Electrodes can be used approximately 3-5 times before they begin losing their adhesiveness. To provide better adhesive support we recommend our It Stays Roll-on Body Adhesive (a19050). TENS Unites are a set of electrodes which are placed on the skin on your back and it emits an electrical signal which stimulate your neurons through the skin. The sensation is more like the tingling and numbness of your jaw after dental work than like pain. Tens Unit Electrodes Directions for Use: Application: Clean skin thoroughly prior to each application of electrodes. Electrodes do not stick well if any lotion, oil, make-up, dirt, etc. is left on skin. Insert the pins of the lead wire from the device into the electrode wire connectors. Remove the electrodes from the protective liner and apply firmly to the skin. Adhesion improves when electrodes reach skin temperature. Helpful hint: Always moisten skin with a damp cloth with water prior to applying electrodes. This will improve the electrode adhesion and life. Removal: Lift at the edge of electrodes and peel. Do not pull on the lead wires when removing electrodes from the release liner or skin. You may damage the electrodes if you do so. Place the electrodes on the liner and remove the lead wire by twisting and pulling at the same time. Care and storage: Between uses, store the electreodes in the resealable bag in a cool, dry place. The life of the electroedes varies depending on skin condition, storage, amount of use, type of satimulation, and stimulation site. Electrode life may be extended by carefully following the application instruction above. Important: The electrodes are intended for single patient use only. Do not apply to broken skin. Should skin rash occur, discontinue use a
|
|
Electrotherapy Slendertone Body Toning System Build your own custom Slendertone Body Toning System! With the Slendertone Body Toning System from ActiveForever you can effectively tone and shape multiple areas of your upper and lower body including your abdominal muscles. Tone both arms at the same time, tone your abs, tone your buttocks, or tone all three areas! It's your choice. Purchase the Arms, Abs, Bottom or all three toning devices to begin your way to a perfect, firmer physique. Slendertone products from Activeforever use EMS (electrical muscle stimulation) to stimulate your muscles for optimal results. EMS utilizes electrical current to flow to the nerve endings located around core muscle groups. Purchase your Slendertone Body Toning System from ActiveForever today! Slendertone System-Abs Belt fits waist sizes 24" - 44" Pads need replaced periodically Includes: Belt Extender Gel Pads Instruction Manual Drawstring Bag (Included) Dimensions: 12.5"L x 7.75" W Firms, tones and strengthens the abdominal muscles Results in just weeks when used for 40 minutes, 5 times a week Available in both male and female belts, for use anytime Slendertone System - Bottom Toner System (Skirt) Fits hip sizes: M = 36"- 45" L = 40"-48" Includes: 4 adhesive pads Bottom toner (skirt) Instruction Manual Drawstring Bag (Included) Dimensions: 12.5"L x 7.75" W The skirt wraps around your waist with two locations for gel pads on the waist band, and one around each leg. The gel pads attach to your outer thigh by means of a strapping system that is concealed by the skirt Firms and tones the bottom Results in 8 weeks when used for 30 minutes, 5 times a week Slendertone System-Arms Garments fit a circumference of 8.66"-14.56" Includes: Instruction Manual Quick Start Guide 4 Adhesive Pads and Straps Drawstring Bag (Included) Dimensions: 12.5"L x 7.75" W Allows you to exercise the triceps of the upper arms Use for 20 minutes, 5 times a week to see results in just weeks Save time and tone b
|
